If you have once encountered the ceiling finish, you probably already managed to evaluate the variety of materials and design for moldings and cornices. Scrolls for suspended ceilings are not just the completion of the finish, they mask the transition from the stretch structure to the wall. Do not forget about decorative moments that can significantly affect the general view.
Ceiling fillets for suspended ceilings
Most often, laconic types of tallizers for the ceiling are included with the tension system, which can be called plugs between the wall and the structure of the structure. They can be both flexible and tough. They are used quite rarely. But decorative skirting boards and fillets for suspended ceilings are used actively and everywhere:
- The foam is less likely to choose due to its fragility and susceptibility to adhesives (a very bad feature is the ability of foam to tighten through time and leave ugly clearances at the joints);
- It is much more convenient to work with polyurethane foam, however, the cost is noticeably higher, but there are no restrictions in the choice of glue, and the flexibility of the material allows you to use it for curved parts of the room;
- A plastic filler for the ceiling will be an excellent solution if you want to imitate any surface, but in your work you should be as accurate as possible, since the irregularities at the cuts are damaged by a stretch fabric.
|
|
|
|
|
|
|
|
|
Separately touches the question of the fillets for the ceiling with backlight. It is no secret that the LED lighting around the perimeter at the moment holds the palm of the championship among the types of backlight. Here they go in two ways: they use wide molding and put the backlight on it, or attach an additional bar. It is necessary to take into account a small gap for the ceiling and rails if you plan a fillets with backlight. Thus, the decorative filler not only gives the finished look of the entire structure, but also allows the designer to use non -standard lighting approaches.
