Not a single flooring is complete without any modifications, parts for leveling the surface between different types of coating and just for completeness. There are a great many types of spikes. You can divide them into these same types according to the material for manufacturing, the type of structure and by type of fastening. It is the division into categories that we will deal with this article.
Porogs design
From the point of view of the design of the rock, we will conditionally identify three options. If it is necessary to dock two types of flooring, a single -level threshold is used. Then the difference in height between the coatings will be minimal. Suitable for small differences.
Two -level rapids are suitable for the floor, where two completely different coating heights were used. For example, a large gap between the height of linoleum and tiles, which must be smooth and made as invisible as possible. The two -level structure allows you to do this qualitatively, outwardly the integrity of the floor will be preserved.
The angular thresholds for the floor are usually used when decorating the corners of the steps. They are used for both internal and outdoor decoration of the house. When choosing, remember the type of flooring and pay attention to the width of the spin. Wide thresholds for the floor are used to do with different coatings, for other cases, spikes can be completely narrow.
Materials of decorative rocks for the floor
As for the material, here the choice is incredibly large, and finding your appearance for each case is not a problem. It is important to understand that the price will fluctuate quite strongly, but the aesthetic characteristics are noticeably vary.
- Metal thresholds for the floor, as a rule, are represented by products made of steel or brass. On top, the metal is covered with a film that improves the appearance of the rock, as well as gives additional wear resistance. With a fairly impressive service life, the price of metal thresholds for the floor is one of the lowest.
- Separately, we select aluminum thresholds for the floor. Among the metal models, they are the most durable and durable. Aluminum thresholds for the floor are good in that they are not amenable to corrosion, withstand maximum daily loads. In terms of design, you can count on standard golden, silver shades. If desired, you can choose for yourself a marble trim, natural wood.
- Flexible thresholds of rubber are two types. There is an aluminum structure with a rubber insert, and there are completely flexible rubber structures. Installation is also two types: fastened with glue or dowels.
- Good shock -absorbing qualities can boast of a canvas from a traffic jam. This is a rake, which has a rounded upper part, which is a little spring. This is the so -called compensation option, giving the most smooth transition from one coating to another.
- Plastic thresholds for the floor are a classic solution for joining laminate, linoleum and carpet. Also a very flexible design that allows you to work with curved joints. Plastic is good because you can easily get any shade and texture that is as suitable for the floor pattern.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Way of fastening thresholds for the floor
For installation in the arsenal of the builder, there are both glue mixtures and the desired fastener. The so -called open mount implies the lack of masking the latter. We are talking about self -tapping screws that are painted in tone for the rapids. They do not hide behind anything from above.
If we talk about a hidden mount, then here is a fundamentally different approach. First, fix the fastener, on top of which the rocking bar will be clung to. In this case, the height of the fasteners corresponds to the height of the flooring.
