It is impossible to make durable repairs if there is no proper control for work. That is why our company has a technical control specialist who monitors the quality of the decoration. Read about what and how the specialist checks in our article.
Content
- What is the specialist of technical control check
- As a technical control specialist checks the work
- What are the advantages of the client from controlling repair?
What is the specialist of technical control check
After you entered into an agreement with our company, builders enter the apartment. From this moment, control over work begins. For convenience, repair is divided into several stages. The number of stages may vary depending on the features of each apartment.
- Preparation and dismantling
- Partitions
- Plaster
- Electrician is black
- Black plumbing
- The floor screed
- Porcelain stoneware
- Floors, doors, skirting boards
- Finishing work
In each stage there is a certain list of finishing work that the masters perform. This work first checks the foreman, and then a technical control specialist (OTO). The decoration in the apartment is checked until the repair is completely done.
As a technical control specialist checks the work
He comes to the apartment after each repair stage and, using measuring devices, checks the finish. A technical control specialist focuses on certain standards-checklists. He literally checks the decoration by points and decides whether to accept the work or not. For example, builders flooded the floor screed. They cannot put porcelain tiles on this screed until a technical control specialist accepts work. He arrives, visually examines the screed for chips, and also checks how smoothly poured cement.
Photo: The screed is checked by the rule with the level
If everything is fine, the builders continue to work, if there are shortcomings – then employees are given time to eliminate them.
Photo: for screed, a deviation of 1 mm per 2 meters of the floor is permissible
Thanks to this control system, it is possible to avoid expensive and complex errors. There will be no situation in which porcelain tile will be laid on a poor -quality screed and it will crack, because the specialist of technical control will simply not miss the screed curve.
Photo: the specialist will not accept the screed with defects and it will have to be redone
The same applies to walls, corners, laying of porcelain stoneware and other works. The specialist checks the corners of the plastered walls using a laser level. The laser will immediately show if there are deviations.
Photo: Laser level allows you to see even small deviations
The outer walls of the walls are checked by the corner ruler. They are made at 90 degrees, so they must coincide with the ruler.
Photo: Clench for external angles
Wall angles with porcelain tiles are checked using a digital square. He shows degrees more accurately.
Photo: measurement using a digital square
The finish plaster is checked using Losev lamp. The lamp shows even the most insignificant defects that are difficult to consider in ordinary light. The specialist checks if there are chips, scratches, hillocks or depressions on the surface.
Photo: Losev lamp is used to check the plastered walls
In addition to walls, slopes and gender, a technical control specialist checks the water supply, heating and electrician
Photo: A specialist in technical control checks the collectors and places of connection of the pipes.
There are many repairs, and therefore there are situations when a technical control specialist does not accept the work. For example, in this apartment, sockets were not installed smoothly.
A technical control specialist gave time to redo the problem area, and the electricians corrected everything. Different deadlines are given to eliminate defects. So that they can fix everything and not rush to the detriment of quality.
Photo: there are shortcomings, but they are easily eliminated, because after each stage of work the finishes are carefully checked.
In this apartment there was a defect on the wallpaper. A technical control specialist took a photo of the problematic site, and the builders were given time to cross the wallpaper.
Photo: Wallpaper canvas with a flaw
After each stage, a technical control specialist makes a detailed photo report and sends it to the customer. Even if a person absolutely does not understand in the repair, he may be calm that the work will be accepted in accordance with all regulations.
Photo: A specialist in technical control sends a photo from an apartment to a chat with a client
The apartment also takes a photo of each individual room without measuring devices. This is done so that the client has an idea of the cleanliness of the room.
Photo: Bathroom after waterproofing
Checking the repair is a complex process, but if necessary, a technical control specialist can tell the customer in detail what and how he was measured, what tolerance and other information are. A specialist OTO is starting from universally recognized building codes, so the quality of the finish will be such as it should really be.
What are the advantages of the client from controlling repair?
- The technical control specialist has only one task – to check objects. It is not connected with the subservients and builders, his salary does not depend on whether he accepted the work at the brigade or not. In his interests to be as objective as possible, because if the customer is not pleased with the repair, there will be questions to him.
- Technical control specialist is the eyes of the customer at the facility. The client does not need to spend his time and come to the apartment after work or on a weekend to accept the work.
Write to us on WhatsApp and we will calculate the full cost of repair with work and materials.
