Before starting repairs in the apartment, you need to carefully prepare for the upcoming work. In the article, we consider how experts protect the elements of the apartment from damage and make water supply, lighting and sewage.
Content:
- Preparation of the apartment for work
- What consumables do we use to prepare an apartment for repair
- Protect important elements in the apartment
- Entrance door protection
- Protection of windows and window sills
- Protection of sensors, meters and heating radiators
- We create conditions for repair so that there is cleanliness and order
- Installation of temporary outlets and lighting
- Installation of temporary water supply and sewage
- We do what is important to you
Preparation of the apartment for work
Repair begins with a acquaintance with the apartment.
- First, the foreman takes the contacts of the representatives of the management company and laid out it in the general working group. This is done so that every employee who is involved in repairs can quickly contact the Criminal Code and solve the issue.
- The brigade also clarifies how many phases and what power is allocated for the wiring of the apartment, which ventilation is on the facility, where you can place external blocks of air conditioners, whether there are interruptions in hot water to find out whether to put a temporary boiler for hot water or not. All this information is also duplicated in the group so that it is at hand.
- The owner of the apartment also draws up a power of attorney for the foreman and provides 2 sets of keys and a magnet so that the employees have access to the apartment, can order passes, get to the parking lot and not disturb the owner for this.
If you do not have spare keys and a magnet, we will make their duplicates at our own expense.
What consumables do we use to prepare an apartment for repair?
In the process of preparing the apartment, you have to use many supplies. They are purchased and delivered to the apartment in the apartment before starting work. These consumers include:
- The toilet with a tank.
- Yershik for the toilet.
- Flexible toilet eyeliner.
- Material for temporary washing, flexible eyeliner.
- Mixer to the sink.
- Delicate scotch tape Folsen for external work (orange) or an analogue.
- Energoflex for pipes.
- Bilateral tape.
- Foamyplex 20 mm.
- Safe or electronic larva.
- The substrate under the laminate.
- Broom.
- Scoop.
- Rule 2m for OT.
- Garbage bags.
- Vetosh – 5 meters.
- Chancellery knife.
- Sockets, cartridges for lighting.
- Gloves.
Protect important elements in the apartment
This applies to entrance doors, window sills, windows, counters, sensors and radiators. We close them so as not to damage them during the repair.
Entrance door protection
The door should be closed from all sides to protect it from chips and scratches that may appear when the builders bring materials into the apartment.
Photo: The door is protected from the inner and outer side
For this, the canvas is first wrapped in a film, and then a double -sided tape is glued to it, and a foam or cardboard is already on it. The tape is used delicate so that there is no glue left after it.
Photo: Box also close the film
The door handle is also first closed with an energy and pipes – this is such a soft corrugation, and then it is wrapped with tape. So it will not be damaged in the process of repair.
Photo: The door handle is protected from dirt with a film
It is very important that the facility has constant access to builders, specialists of technical control and designer. Therefore, the keys to the apartment are stored in a keyboard on the door or put an electronic lock.
Photo: This method also prevents the loss of keys and the fact that someone will take them home and there will be no access to the apartment
Protection of windows and window sills
First, the factory film is removed from the window and window sill. If you leave it, after six months of repairs it will dry and it will be difficult to tear it off. Also at this moment, surfaces are examined for chips and cracks and, if any, take their photos. Then the windows are wiped and closed with a film or cardboard. The material is fixed with painting tape. Cardboard is glued to the windowsill.
Photo: window protection using a film and foam
Protection of sensors, meters and heating radiators
If the apartment has smoke sensors, movements and others, they are either disconnected or closed with a film for the duration of the repair. The gas and water meters are also wrapped in a film. Heating radiators and internal convectors are covered with cardboard or film.
Photo: radiators covered with film
We create conditions for repair so that there is cleanliness and order
So that there is no disorder in the room, a rack for tools and a cabinet for clothing is brought to the apartment. Plastic containers are also imported. Small details are stored in them so that they are not lost. Thus, everything lies in its place and does not interfere with work and verification of the finish.
Photo: Things and tools are stored in racks
To maintain cleanliness, builders are given a broom, a brush and a scoop. Be sure to lay the rug in front of the entrance and moisten it with water so as not to distribute dust from the apartment to the corridor and back.
The builders have a construction vacuum cleaner in the apartment, they pass after each stage of work so that there is no dust and dirt in the apartment.
Installation of temporary outlets and lighting
In order for an electric tool to work in the apartment, a temporary outlet is connected to the shield, and extension cords are already to it.
The extension cords themselves extend the floor to protect the builders from an accidental breakdown of the wire and so that they do not interfere with the passage.
In each room, a cartridge with a lamp is hung on the ceiling. Lighting and sockets are powered from different machines in the shield so that there is no overload to the network.
Photo: Temporary lighting in the apartment
Installation of temporary water supply and sewage
In the apartment, a temporary sink is installed and connected to the water supply. To do this, use an inexpensive shell with a cabinet.
Builders also install a temporary toilet. It is connected to the sewage system, and after the repair it is thrown away.
We do what is important to you
- Even before repair, our experts are engaged in passing and find out all the necessary information so that during the repair, do not bother you by trifles.
- We provide conditions so that builders can keep the apartment clean and there was no mess.
- Before repair, builders protect all the necessary elements so that you do not have to waste time cleaning them later.
- All temporary systems such as water supply, electrician and lighting are absolutely safe, you can not worry about the safety of the apartment.
Write to us on WhatsApp and we will calculate the full cost of repair with work and materials
