The ceiling skirting board under the PVC panel resembles in shape and purpose the starting profile with a decorative element of a triangular cross section. It is made of polyvinyl chloride base, like plastic panels.
Varieties and advantages of PVC skirting boards
The product can be solid, that is, decorative (border) and fasteners are connected in production. For PVC panels, a collapsible ceiling baseboard is provided (detachable with latch). In fact, this is a profile start with a special groove and a removable edging. Such models are more convenient in installation, used for the device of suspended and suspended ceilings.
PVC does not eat dirt, with pollution it is easy to wash, does not burn out. Such a cladding is durable and affordable. The mass decisions are a mass, if necessary, the finish is quickly disassembled without damage to the load -bearing surface. With wall or ceiling panels, the edging creates a complete picture.
How is the ceiling skirting board for PVC panels attached?
A plastic skirting board can perform not only a decorative function as a trim for plastic fixed on the crate. If the room is narrow, the crate is absent, the filler is a supporting element. Due to flexibility, you can easily disguise the irregularities of the wall.
The work begins with the installation of the crate. Then the ceiling skirting boards for PVC panels are attached, 3, 6 meters in length, up to 5 cm wide. For the fasteners of the skirting board to the frame, you will need a construction stepler or self -tapping screws for wood or metal (depending on the type of crate).
The use of “liquid nails” is allowed. For trimming, a knock is used. Ceiling or wall plastic will be inserted into the spoon (groove). Slits and seams are sealed with acrylic sealant. If necessary, corner pads are placed. The installation is fast and not laborious.
|
|
|
|
|
|
|
|
|
