Place of transition of the ceiling/wall is closed by fillets (ceiling plinths). On the practical side, the product will hide defects around the perimeter of the room. The decorative component is no less important: a finished composition is created, accents are placed.
Types of modern ceiling fillets
The standard option is the use of ceiling foam fillets. This is the most budget approach to decoration. The advantages of the product include maximum simplicity during installation, reliability during operation in wet rooms with temperature drops, that is, suitable for bath, kitchen. Cutting is carried out by a clerical knife. Over time, the edging will not yellow, it is convenient to paint it with a “water -based.” Used to finish drywall structures, putty ceiling.
|
|
|
For zones with bends, irregularities, it is better to use ceiling polyurethane fillets. Due to higher quality, better flexibility – the price is higher than that of the previous model. It is mounted on glue based on acrylic or silicone.
|
|
|
For the final sewing of the PVC wall, appropriate plastic elements with special locks are needed, for example, ceiling fillets from polystyrene foam will not be suitable.
It is convenient to use “artificial” skirting boards as ceiling fillets for suspended ceilings. In this case, it is convenient to mount a flexible edging, it is narrow, without a pattern. On top of it, a different type of ceiling/wall joint finish is used. Use ceiling fillets for backlighting.
|
|
|
Classic scenes
Before the appearance of plastic skirting boards, the ceiling filler was made of gypsum. Fastening, painting will take a lot of time and effort. The gypsum trim on alabaster, putty solution or on the same gypsum is “planted”. Most often, this option is used to replace damaged fillets.
The ceiling wooden filler is appropriate in the interior only if there are many wood elements in the room. Glue is not used to install panels, self -tapping screws, nails, screws will be required.
|
|
|
Classic products are used less often, despite reliability. It is worth noting them not always a democratic value.
