Homemade for a summer residence (48 photos): the use of bottles and car tires. Making plastic palm and stool

Without a strong and comfortable house, a spacious and roomy barn, a beautiful and comfortable gazebo outside the city can not be. But the homework for the cottage and for the garden give real identity and individuality to the land plot. It is about the manufacture of these little things that are cute to the heart that will be discussed below.

Home -made accessories give originality and individuality to the land plot

Crafts from improvised materials

Not so long ago, the summer cottage was considered by our compatriots only as a source of fruits, berries and vegetables, which diversified the diet during a long and cold winter.

Now, more and more people consider it as a place where you can relax well and relax after a busy week spent in the city. That is why many began to devote a great influence and decorative component.

Some hire landscape designers for this purpose, however, the price of their services is usually quite high. But many interesting and practical things that will decorate your yard, garden and garden can be made with your own hands. Moreover, for this you can use various improvised materials that otherwise go to the landfill.

Anything can be used as a material

Bottles

Country homes from polymer bottles are not only aesthetic, but also environmentally friendly. After all, plastic decomposes for a very long time on landfills, releasing harmful chemicals into the atmosphere. And using as a building material, you breathe a second life in them.

Advice!
For the manufacture of certain structures, not only plastic, but also glass bottles are suitable.
By combining materials, shapes and colors, you can create an installation for the garden and garden, which will play a key role in the landscape design of the summer cottage.

Here are just a few of the most common ideas:

1. Bird feeders. These useful home -mades for the home and cottages not only decorate the exterior, but also help birds, saving them from hunger. The material will be a plastic 3 or 6-liter bottle. The manufacturing process itself is simple. It is only necessary to cut out the holes of a suitable size in the right places and pour into the feed.
2. Vazons. Having cut off the upper part of the bottle, you can use it as a vase for decorative or garden plants.

Photo flowerbed from plastic bottles

3. Fences for flower beds. In this case, it is better to use glass bottles. Having stuck their neck in the ground around the perimeter of a summer cottage flowerbed or flower garden, you will get an original and original fence that diversifies the appearance of the site.
4. Jewelry for the playground. The first thing that comes to mind: a plastic turntable, a mill or the sun. However, more creative and hardworking summer residents can be advised to make a palm tree. Our instruction, given below, describes in detail all the stages of work.

Making a plastic palm

Before you start directly to the manufacture, you need to stock up on the following materials:

• Plastic bottles of green and brown;
• several rods of reinforcement or 2-3 pipes (by the number of palm trees);
• glue;
• wire;
• Concrete or cement mortar for pouring the base.

Palma from plastic bottles

Further operations are performed as follows:

1. A small pit is dug into which pre -stored metal rods or steel pipes are installed.
2. The design for strength is covered with stone, pieces of brick or cinder block, after which it is poured with concrete or cement mixture.
3. In brown bottles, you need to cut off the bottom, and then put them on the previously installed pipe. The number of parts depends on the height of the future palm. It is necessary to make sure that the entire metal part is hidden.

Advice!
To make the palm decorative more durable, it is recommended to additionally glue the bottles with each other with silicone glue.

4. Tropical wood leaves are cut out of green bottles. To do this, the parts are removed in the parts, after which the cylinder cuts into narrow stripes, without cutting about 2 cm to the neck.
5. Separate elements of the crown are planted on a steel wire and fixed on it. Ready -made lush branches are attached to the supporting part by welding or bolts.

Pay attention!
One day the installed palm cannot be transferred.
Therefore, if you use summer houses from block containers, make sure that after building the capital structure, decorative elements organically fit into the landscape design.

Car tires

What else can be built from the cottage in the country: in the country, products from car tires look great.

Let us dwell on the most common ideas:

1. Flower garden. It is necessary to paint your tire that has worked out and throw it into the ground about half the width.

Front from old car tires

2. Sandbox. A place for games is made similarly to a flowerbed. It is necessary to take care so that pieces of reinforcing wire (cord) that can injure children do not stick out of the tire.
3. Decorative figures. It all depends on your imagination. The most difficult task is the correct cut of the tire. It is best to use a hacksaw for metal or a special power tool for these purposes.

Advice!
If there is no electricity at your dacha, the diesel generator diesel generator will help out.
Using this device, you will drive an electric saw, grinder, punch and many other necessary power tools.

Production of a stool

From a rubber tire for a car, you can make a comfortable and beautiful ottoman, which is suitable for a garden, gazebo or at home.

Materials in this case will serve:

• old tire from the wheel for the car;
• two sheets of thick plywood;
• Fat stump or synthetic rope.

The manufacturing process consists of such consistent stages:

1. From sheets of plywood, two circles are cut out, whose diameter is 2-3 centimeters less than the size of the wheel.

We fasten the plywood

2. Parts are attached to rubber with self -tapping screws.
3. Then, with the help of an adhesive gun, a rope is fixed on the tire. It must be glued so that the rubber base is not visible in the gaps.

We lay the rope so that there are no gaps

https://www.youtube.com/watch?v=ecpxl6gpycs

4. After that, the entire surface is covered with varnish, which will not only give the product an attractive appearance, but also extend its life, protecting from negative external factors.

The ottoman from the rubber tire is almost ready for operation

Conclusion

The list of homemade dachas given in this material is not exhaustive. By showing a fraction of imagination, you can make many other crafts from wood, bottle covers, old beds and so on. You can learn more about this from the video in this article.