The final stage of the repair is one of the most difficult, so it needs strict control, in this article we will consider how a technical control specialist will be checked in the final stage of repair.
Content
- Putty walls and slopes
- Wallpaper, paint
- Window sills
- Floor covering
- Moldings and skirting boards
- Doors
- Sockets and switches
- Stretch ceiling
- Finishing plumbing
- Lamps, chandeliers and track lighting
- Furniture, equipment, decor and kitchen
- Conclusions
Putty walls and slopes
In order for the finish coating on the walls to be placed smoothly, it is important to prepare the walls with qualitatively. A technical control specialist evaluates the surface of the walls using Losev lamp. With its help, you can see even the smallest irregularities and chips. The putty should be smooth without roughness.
Photo: The walls for painting are checked by Losev lamp
The specialist also watches that there will be no sockets in the mounting boxes where there will be no putty. The wires should also be clean. If there are defects on the wall, technical control does not accept the work and gives time to correct flaws.
Photo: There are convex areas on this wall
In our telegram channel, we regularly upload photos and videos of apartments.
Wallpaper, paint
At this stage, technical control conducts a visual examination of walls with Losev lamp. If the wallpaper is on the wall, then the pattern should be visually fitted, without bubbles, spots and passes. If the paint, then the surface should be evenly painted, without stripes, spots and subtexts.
Photo: paint as well as the wallpaper is checked by Losev lamp
Window sills
The window sill specialist in technical control checks using the level. A visual inspection of the surface and edges is also carried out.
Photo: checking the windowsill using the level
Floor covering
The specialist of technical control checks the floor covering using the rule. They also look so that there are dense joints between the tiles.
Photo: flooring is also checked for chips and scuffs
Moldings and skirting boards
When there are already paint or wallpaper on the walls, the Malyars glue moldings. Technic control checks the joints between the moldings and how evenly they were pushed. To do this, use a laser level.
Photo: skirting boards should be installed tightly to the wall and ceiling
Doors
After moldings, builders install doors. Technical control checks how the box is installed relative to the wall, the door leaf for chips, door handles and loops.
Photo: Doors should be on the same plane with a wall
Photo: Tech control checks every little thing, for example, doors limiters
Sockets and switches
Rosettes and switches must be installed smoothly and work. They are checked using a level and a tester.
Photo: checking the outlet with laser levels
Photo: checking the outlet with a tester
Stretch ceiling
The stretch ceiling is checked so that it is tightly pulled and not sagged. The ceiling plane is watched with a laser level.
Photo: The stretch ceiling is examined for spots, cuts and other flaws
Finishing plumbing
Builders complete finish work in the bathroom and install finishing plumbing. A technical control specialist checks how the faucets, a sink and other details are installed. Everything should work and do not leak.
Photo: inspection of the mixer and shell in the kitchen
Photo: checking the connection of drain and water supply. If there is a water filter, it is also checked at this stage
Photo: checking mixers and cranes in the shower
Lamps, chandeliers and track lighting
A technical control specialist checks how they collected a chandelier, installed tracks and spotlights. Are the lamps burning.
Photo: All lamps must be installed smoothly and burn
Photo: installed track lighting
Furniture, equipment, decor and kitchen
After the builders collect furniture and install the equipment, the technical control specialist checks the build quality, whether the equipment works correctly.
Photo: At the very end of the technical control, the mirror checks
Photo: furniture and other elements are installed according to the drawings
Conclusions
After all the checks, the technical control rents the apartment completely ready for living. Thus, you do not need to worry about finishing, for the fact that after the repair builders will leave scratched furniture or non -working equipment. This approach saves strength, and most importantly – the time that you can spend on more important things.
Write to us on WhatsApp and we will calculate the full cost of repair with work and materials.
