A wicker fence of boards is an exclusive and unusual fence that looks extraordinary and attractive. In the summer cottage, in addition to the function of the fence and protection of the territory, it will act as a decoration. In manufacture, this type of fence is not complicated.
Methods of weaving fence
For installation of the fence, strugar boards are used, before that they are treated with an antiseptic, a primer in order to protect the material from insects and the appearance of the fungus.
For the construction of the fence, supports of wood or metal are installed in width from two to three meters. In order for the structure not to be loosened, it is better to concrete the pillars.
The supports that were decided to additionally clad with brick, stone, or concrete racks? Usually filled with the foundation along the entire length of the fence. Such a fence will look more solid.
Weaving the fence is carried out in the same way as before using a flexible vine – horizontal or vertical weaving. Only boards are chosen as the material.
A wicker horizontal fence of boards involves their laying parallel to the soil. For such a fence, the first pair of vertical rails through which weaving will be carried out is mounted in the flight. The picket fence is attached to the supports with nails or self -tapping screws, especially the ends of the boards.
In a vertical wicker fence, two or three transverse crossbars are attached from the boards, through which the material is perpendicular to the soil. When weaving, the transverse lags should be framed by boards on both sides. The first two strips are installed clearly horizontally, the work begins from the pillar. The upper board is often attached to the racks without weaving. You can fix it without a braid and the lower crossbar to the supports.
Both the first and second weaving method look very beautiful. The design of a wicker wooden fence is kept due to the tension created by the bent board. The strength of the structure is due to how tightly the boards will be laid. The lower gap can be laid with brick or stone.
Wicker fence from boards – beauty and originality
There are many variations for the performance of a wicker wooden fence from the boards, it all depends on the imagination of the performer.
For example, the use of narrow and wide boards allows you to create different in appearance fences. The wicker fence is more durable than an analogue from the vine, and it is also easily made. To increase the life of the fence, it must be covered with a finish coating – paint, olifa, colored varnish.
An interesting option could be the color of the fence in two shades. For example, the bottom is dark, and the top is light. After a few years, the processing of varnish-color materials must be repeated so that the fence retains a beautiful appearance and serves for more than one decade.
Decorative functions are only one of the advantages of this structure. In addition, there are still a lot of advantages: ease of installation, the use of natural natural materials, ensuring reliable protection against uninvited visitors. In addition, this design has a low cost and looks much more expensive, given the finances for its installation. A similar fence can be installed even from old boards that have not lost their fortress.
Wicker fences are now quite rare, and using boards for weaving allows you to make an original decoration from the fence. In combination with structures from other materials, they will look harmonious in the suburban area. The structure looks openwork and light, fits perfectly into the landscape design.
 |
 |
 |
 |
 |
 |
 |
 |
 |
