The stove is produced for two reasons. Firstly, this must be done in order to prevent dust and dirt from getting into the masonry seams, sunbathing, they will spread an unpleasant odor. Secondly, this finishing work is carried out with an aesthetic, decorative goal, or as the basis for future cladding with tiles, glaze or ceramics.
A layer of plaster applied will increase the thickness of the walls, and this, in turn, will lead to the heat capacity of the structure and save fuel, will also increase fire safety and reduce the possibility of entering the dwelling.
Purrender of furnaces and fireplaces is the most inexpensive and immature way, which allows you to make the surface of the furnace aesthetically attractive and carries a practical and functional load on itself.
What should be the stack for the stove and fireplace?
Sand-clay compounds are used for plaster furnaces and fireplaces, and in the modern version, plastering professional mixtures, various compositions and types sold in construction retail outlets.
The high operational qualities of plastering mixtures used for stoves and fireplaces directly affect the duration of the service life of the plaster layer.
The stoves and fireplaces are constantly subjected to temperature changes, so the composition of the mixtures of plaster should be heat -resistant, while environmentally friendly so that harmful substances do not stand out when heated.
The heat -resistant stucco for the furnace has sufficient strength and elasticity that will not allow it to crack under the influence of fever.
Fire -controlled stucco for the furnace has increased reinforcing properties, it includes various components that allow to withstand the temperature up to 400 degrees. The advantages of such a composition for plastering of stoves and fireplaces are its magnificent adhesion to the surfaces, ease of work, resistance to cracks, fire safety.
Enough a layer of heat-resistant, refractory plaster not exceeding 2-3 cm so that it protects the structure for 30-50 years.
Often, for the final stage of the furnace decoration, decorative plaster is used. For such a goal, the most suitable decorative plaster mixture with interspersed crumbs made of stone, based on acrylic or silicone resin.
 |
 |
 |
 |
 |
 |
 |
 |
 |
