{"id":3915,"date":"2025-06-08T02:17:12","date_gmt":"2025-06-08T02:17:12","guid":{"rendered":"https:\/\/decoredhome.com\/index.php\/2025\/06\/08\/how-to-make-a-cut-of-tiles-of-tiles-at-45-degrees-in-the-bathroom-complete-instruction\/"},"modified":"2025-06-08T02:17:12","modified_gmt":"2025-06-08T02:17:12","slug":"how-to-make-a-cut-of-tiles-of-tiles-at-45-degrees-in-the-bathroom-complete-instruction","status":"publish","type":"post","link":"https:\/\/decoredhome.com\/index.php\/2025\/06\/08\/how-to-make-a-cut-of-tiles-of-tiles-at-45-degrees-in-the-bathroom-complete-instruction\/","title":{"rendered":"How to make a cut of tiles of tiles at 45 degrees in the bathroom. Complete instruction"},"content":{"rendered":"


\n<\/p>\n

\n

Wrung tiles under 45 degrees – the phenomenon is not new, but quite common in expensive interiors. In the article, we consider with which tools you can make a cut of tiles, how the process of howling occurs and what are the advantages and disadvantages of this method.<\/p>\n

Content:<\/p>\n

    \n
  1. Why make cuts of tile angles at 45 degrees<\/li>\n
  2. What tool is needed to cut off the angles at 45 degrees\n
      \n
    1. Washed tiles under 45 degrees using an electric tile cutter<\/li>\n
    2. Washed tiles under 45 degrees using a grinder with a diamond disk<\/li>\n<\/ol>\n<\/li>\n
    3. Cons was drunk under 45 degrees\n
        \n
      1. Sales under 45 degrees are not safe<\/li>\n
      2. Tilewood cuts at 45 degrees – fragile<\/li>\n
      3. Tiles of tiles under 45 degrees are expensive and difficult to repair them<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n

        Why make cuts of tile angles at 45 degrees?<\/h2>\n

        This solution allows you to make beautiful even corners without unnecessary plastic or metal inserts. The corners can be both vertical and horizontal. <\/p>\n

        <\/b>
        \nPhoto: comparison was drunk tiles and angle with a metal insert <\/em><\/span><\/p>\n

        To make a footstand, porcelain tile or ceramic tiles are cut down and put to each other. It was especially in demand by the shutdown of angles at 45 degrees, when the bathroom is designed in the style of minimalism. <\/p>\n

        <\/b>
        \nPhoto: Wrinking angles is suitable for minimalistic interiors <\/em><\/span><\/p>\n

        Sharped tiles at 45 degrees – this is an expensive procedure. It requires a master of high professionalism and expensive equipment.<\/p>\n

        <\/b>
        \nPhoto: In the bathroom, porcelain tile shelves are often made with a backup of 45 degrees<\/em><\/span><\/p>\n

        The difficulty lies in the fact that porcelain tiles or ceramic tiles during cutting can be easily damaged or spoiled. It is necessary to accurately calculate the gap between the tiles, otherwise the angle will turn out to be uneven. It is especially difficult to work with large -format porcelain tiles: it is stronger than ceramic tiles, so chips may appear during cutting.<\/p>\n

        <\/b>
        \nPhoto: There should be no gap between the tiles<\/em><\/span><\/p>\n

        What tool is needed to cut off the angles at 45 degrees<\/h2>\n

        For howling tiles, you need an electric tile with water cooling or a grinder with a diamond disk. For grinding the corners, you will need a grinding machine with a diamond circle and a clip of a clip if the tile is cut with a grinder.<\/p>\n

        <\/b>
        \nPhoto: Tilewood tool tool<\/em><\/span><\/p>\n

        Washed tiles under 45 degrees using an electric tile cutter<\/h3>\n

        Electric tiles with water cooling is the best solution for cutting tiles. You can cut the tiles on it with particular accuracy, and in the process of cutting, dust does not appear that interferes with the work.<\/p>\n

        <\/b>
        \nPhoto: Electric tile cutter already has a special gap for cutting tiles <\/em><\/span><\/p>\n

        It is necessary to take the tile and mark it on it at 45 degrees. This can be done using a corner ruler. Next, the cut place is marked with painting tape. This method allows you to always see the line in the process of cutting tiles, not to go behind it. If you just mark it with a pencil, it will not be visible. Then the tile is placed on the tool with the front side up. So the surface of the tile will not be damaged during cutting.<\/p>\n

        \n<\/b><\/p>\n

        Next, with the help of a tile cutter, all excess is cut off. The main thing in the cutting process does not hurt the glaze layer. The glaze should still remain 0.5\u20131 mm. <\/p>\n

        <\/b>
        \nPhoto: Grinding allows you to make a cut smooth and even<\/em><\/span><\/p>\n

        After that, they pass through the corner with a grinding machine for 3 thousand rpm. It is better to use a grinding circle with a granularity of 1,500. They can remove minor defects. <\/p>\n

        <\/b>
        \nPhoto: grinding circles with different granularity<\/em><\/span><\/p>\n

        If there is no grinding machine, then you can polish the angle using sandpaper with a grain of 100\u2013180. <\/p>\n

        <\/b>
        \nPhoto: sandpaper for manual grinding<\/em><\/span><\/p>\n

        After one tile is processed, you should go to the second and repeat the procedure. Next, the tiles are put to each other and check the resulting result. If there is a small gap, then the tiles are again polished until the desired result is achieved. <\/p>\n

        <\/b>
        \nPhoto: Sometimes grinding takes more time than washed tiles<\/em><\/span><\/p>\n

        Washed tiles under 45 degrees using a grinder with a diamond disk<\/h3>\n

        Washed tiles with a grinder – a more complex and long option. In this case, errors may appear in the process of cutting. First, it should be marked with a cut with a pencil and painting tape. Then the tile is fixed in a vice of the glazed surface up. <\/p>\n

        <\/b>
        \nPhoto: Tiles should be fixed in a vice during a cut<\/em><\/span><\/p>\n

        In order not to appear chips, cut the tiles with a diamond disk at 1-2 thousand rpm. The grinding machine at this moment should be kept at an angle of 45 degrees relative to the tile. You need to remove the excess gradually, thin layers. The glazed surface should remain about 2 mm.<\/p>\n

        <\/b>
        \nPhoto: 1-2 mm should remain to the outer layer<\/em><\/span><\/p>\n

        After the angle is formed, it must be polished at 2-3 thousand revolutions. The same manipulation should be repeated with another tile. After that, they are connected to each other and watch the result. If the joints do not converge, the tile is re -polished. <\/p>\n

        <\/b>
        \nPhoto: tiles are watered with water during polishing <\/em><\/span><\/p>\n

        Cons was drunk under 45 degrees<\/h2>\n

        Switching tiles under 45 degrees gives the room minimalistic and neat features, but this solution also has disadvantages in comparison with the corners where metal or plastic profiles are used.<\/p>\n

        <\/b>
        \nPhoto: tiles in the corners of the bathroom<\/em><\/span><\/p>\n

        Sales under 45 degrees are unsafe <\/h3>\n

        Those who at least once hit the angle, perfectly represent how much pain such a meeting causes. Therefore, the corners in the bathroom, even polished, are a dangerous element of the interior that you will not protect. <\/p>\n

        <\/b>
        \nPhoto: The cuts of the corners are sharp and pose a danger<\/em><\/span><\/p>\n

        Tilewood cuts at 45 degrees – fragile<\/h3>\n

        Shards under 45 degrees make the angle fragile, and it may break from the blow. Therefore, it is better not to make them in passing places where you can hook corners, for example, furniture.<\/p>\n

        Tiles of tiles under 45 degrees are expensive, and they are difficult to repair<\/h3>\n

        Washing tiles at 45 degrees increase the repair period and its cost several times. If such an angle is damaged, it is difficult and expensive to repair. At the same time, the repair work is quite dusty. <\/p>\n

        <\/b>
        \nPhoto: repair of tiles – expensive and dusty process<\/em><\/span><\/p>\n

        Conclusion<\/h2>\n

        Sharped tiles under 45 degrees are made in expensive and minimalistic interiors. This is a difficult procedure that needs to be done on expensive equipment. It is best for the cut of tiles that electric tiles with water cooling is suitable. After howl tiles are howled, it must be made smooth with a grinding machine.<\/p>\n<\/article>\n


        \n
        Source<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

        Wrung tiles under 45 degrees – the phenomenon is not new, but quite common in expensive interiors. In the article, we consider with…<\/p>\n","protected":false},"author":1,"featured_media":1814,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/posts\/3915"}],"collection":[{"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/comments?post=3915"}],"version-history":[{"count":0,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/posts\/3915\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/media\/1814"}],"wp:attachment":[{"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/media?parent=3915"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/categories?post=3915"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/decoredhome.com\/index.php\/wp-json\/wp\/v2\/tags?post=3915"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}